Design the future
компанія овентроп

Regumaq X-25

  • Information
  • Gallery
Regumaq X-25
  • Water circuit heating station with integrated controller for temperature adjustment.
  • Productivity: 1-30 l / min.
  • Max. working pressure: 10 bar.
  • Max. operating temperature: 95 ° C.

Rated performance according to the SPF test procedure:

  • Productivity of 30 l / min at GV-3K.
  • HV = 10 ° C, HV = 60 ° C (setting value) TAccumulator = 75 ° C.
  • Water temperature setting range in the water supply circuit: 20 - 60 ° C.
  • Connection: G 1 flat seal for connecting the battery and the water supply circuit.

Water supply circuit: electronic flow meter, safety valve 10 bar, 2 thermometers of resistance PT thousand, 2 KFE taps and ball valves.

Cumulative circuit: 2 KFE valves, ball valves, circulation pump and non-return valve, 1 PT 1000 resistance thermometer.

Dimensions W x H x D (external dimensions of insulation): 400 mm x 625 mm x 240 mm

If necessary, the water is heated instantly: «Just in Time». It is applied, first of all, to cottages and is connected to the heat accumulator. The speed of the circulating pump from the heating circuit is regulated depending on the temperature and flow from the hot water supply circuit.

The plate heat exchanger meets European standards. Due to the turbulent flow, the effect of self-cleaning is provided and, thus, contamination of the heat exchanger is prevented. The plate heat exchanger on the primary and secondary circuit side can be flushed with the built-in KFE taps. The hot water supply circuit is protected against overpressure by a 10 bar safety valve. The valve of the heat exchange system has a connection with a flat seal, mounted on a bearing panel and checked for leaks. The controller is already connected to the station and has an output for S-Bus to connect the data logger «CS-BS».

Gallery