PE nova water+

• Power 10 kW.
• Senotherm black lacquer case;
• Metallic frontcoat senotherm;
• Built-in installation in a separate case;
• Acceptable fuel: wood pellets (Ash content & lt; 0.7%);
• CE compliance;
• Testing according to DIN 18 894, EN 14 785;
• Microprocessor control;
• Chimney O 100 mm;
• Electric ignition;
• Air supply sensor;
• Integrated high return temperature protection (75˚C) / only for model water +;
• Connecting element O 150 mm for air supply (optional);
• All air + models are equipped with an AWT 01 flue gas heat exchanger
• High quality construction with double & nbsp; steel and cast iron walls;
• External pellet feed adapter;
• Large glass-ceramic panel;
• Connecting a room thermostat;
• Tank contents min. 38.5 kg / max. 55.0 kg;
• Child safety door lock;
• Four locked videos;
• Patented combustion technology.

Wood pellets are a fuel with neutral CO2. This means that burning wood pellets releases only the amount of carbon dioxide (CO2) that the tree or other plants have absorbed during their lifetime and that could be released again during the decay process. Heating with wood and wood pellets thus closes the natural CO2 cycle.

Pellet fireplaces with water module
Wodtke water + pellet fireplaces contain an integrated built-in water heat exchanger, which makes it possible to supply the heat obtained in the process of burning wood pellets into the heat supply system through the storage tank. Thus, pellet fireplaces with a water circuit simultaneously heat the room in which the installation and the storage tank. Preserved heat is possible at any time use for hot water or heating system operation. Since only part of the nominal capacity of fireplaces with a water circuit is allocated directly to the room, they are ideal for use in low-energy or passive houses. During the independent testing of pellet fireplaces with a water circuit from Stiftung Warentest, the wodtke ivo.tec water + fireplace won the Stiftung Warentest test - efficiency (1.0) overall rating GOOD (1.8). Pellet fireplaces with a water circuit from wodtke have a very high efficiency of up to 90% and can be optimally combined with a solar system, photovoltaic system or heat pump. From an energy point of view, these very efficient combinations of different energy sources can help minimize heating costs.

In case of using ambient air for combustion of the fireplace and operation in the house with recuperation, it is necessary to provide use of the differential pressure regulator wodtke DS01 which will guarantee safe operation of system in emergency situations (for example, return draft). DS 01L Wodtke controls the pressure difference in the combustion chamber or chimney during the operation of the fireplace in relation to the pressure in the room where the fireplace is installed. If the pressure difference drops below the minimum set value, the ventilation system is switched off. Monitoring of pressure drop occurs in case of increase in temperature of flue gases of a fireplace (the temperature sensor is included).