Design the future

Peletti Touch

  • Information
  • Gallery
  • Download
Peletti Touch

Pelletti TOUCH pellet boilers from Paradigma offer the same comfort as modern heating systems based on gas condensing boilers, thanks to automatic fuel supply and ash disposal. The power range from 12 kW to 56 kW provides optimal adaptation to the required heat demand.

PELLETTI TOUCH automatically adjusts its power from 30% to 100%. The boilers are equipped with an automatic ash collection system, which transports the ash to the ash pan, depending on the operating time of the boiler, and there is a process of its compression. The boiler is also equipped with a kit to increase the return temperature to prevent low-temperature corrosion and soot formation. Automatic ignition and fuel supply, combustion with low emissions at full and partial load, as well as minimal losses in standby mode ensure comfortable operation of the heating system. PELLETTI TOUCH is equipped with an automatic cleaning systemheat exchanger, which is activated depending on the operating time of the boiler.

The main characteristics of the pellet boiler Peletti Touch:

  • Power range: 12/15/20/25/32/36/48/56 kW
  • Innovative combustion control with oxygen sensor (lambda probe)
  • Possibility to complete the flue gas heat exchanger (condensation mode)
  • Intelligent Pelletti SmartStart-Technologie for fast ignition and access to the set operating mode
  • Automatic cleaning of the heat exchanger from soot
  • Models with comfortable ash removal easy maintenance
  • Increased insulation of the boiler body with minimal heat consumption;
  • High efficiency of 94% efficiency / in the condensing mode - 102.6%
  • Stainless steel burner
  • Awarded the Blauer Engel Ecological Label
  • Wide selection of textile pellet storage bins
  • Large number of auger and vacuum pellet feeding systems
  • Unique Crete pellet loading system
  • Automatic ash disposal systems
  • Wide choice of regulators implementation of any heat supply scheme
  • Neutral CO2 emissions
  • PELLETTI TOUCH boilers can be supplied with an exhaust gas heat exchanger to ensure condensation. BWT heat exchange modules are available in the range from 25 to 64 kW. The stainless steel condensing heat exchanger is located at the rear of the boiler and uses additional flue gas energy and thus increases the boiler efficiency by approximately 10%. Condensing systems protect the environment and save up to 15% on heating costs.

    Gallery